HuntFishQuest.com

Oh heck that might take a while to find . i replaced the fuel lines on this one and she started right up

Sent from my LGUS992 using Tapatalk

Found one in Morristown its a 1961 evinrude 18hp fastwin. For a whopping 300. Heck yeah be back on the lake again Sent from my LGUS992 using Tapatalk Cool! Get out there and catch a boat load! Sent from my SM-G925F using Tapatalk I going to try too but mostly catch anf release thou Sent from my LGU...

Found one in Morristown its a 1961 evinrude 18hp fastwin. For a whopping 300. Heck yeah be back on the lake again

Sent from my LGUS992 using Tapatalk

Yeah last sunday was setting on the bank fishing and looked up there he was lol everything checked out good and he was off again.

Sent from my LGUS992 using Tapatalk

Been off the grid for a little bit again but now stuff seem to be looking up now and everything seems to be doing good.

Sent from my LGUS992 using Tapatalk

Well looks like ill be getting just my smal game and fishing license if that is true Sent from my LGUS992 using Tapatalk Charlie the license has not increased. It is the same as last year. The package deals include duck stamps and other stuff. The annual sportsmans license is the same as last year....

I been looking for a short shaft tiller handle boat engine i would like to find one over atleast 10 horse. I had a 1960 evinrude 18 hp fastwin last year but didnt like the way it preformed. Aint looking to spend over 400 for one thou

Sent from my LGUS992 using Tapatalk

Well looks like ill be getting just my smal game and fishing license if that is true

Sent from my LGUS992 using Tapatalk

Dang i know the lake finally is going back down. But if it keeps on raining it will be back up again. But dang that sucks to find it under water thou

Sent from my LGUS992 using Tapatalk

Well the lake it at summer level by what tva says. But its still up in the bushes by 4 foot. But the fish are biting better then what they did 2 weeks ago

Sent from my LGUS992 using Tapatalk

One thing I dislike from Dodge 's is the front ends . Hope they have done better but had a Durango that you couldn't keep ball joints in it dang every year you would feel the sway in the front end and sure enough ball joints bad . Yeah i seen they need to be changed also so i might as well change t...

Could you put a heli-coil insert where the hole was drilled out reckon? Or get a caliper assembly from the salvage yard, which is probably where I'd be looking. Good luck buddy. Yeah its beyond repair im going to pull a part to get a new streering knuckle. They have a few that will interchange with...

Yes that bolt was bent i noticed the brakes wasnt working like they should.So i been trying to find the part to fix it and turns out i have to buy a whole other spindle knuckle . i bought new caliber bolts but where they suppose to screw in to has been drilled out. But it will be fixed tomorrow afte...

Well my brother bought a 2002 dodge dakota from a car lot here in the county.well i notice the brakes wasn't good . So today i decided to change the brakes and when i took the tire off this is what i see. This is not the way it should be. Someone either drilled the treads or stripped them on the spi...

Just loss my appetite for the day. Thanks alot bucky LOL [emoji1] [emoji1] [emoji1]

Sent from my LGUS992 using Tapatalk

Yep, Norris lake is being released over Norris dam. I posted a pic of what the Clinch river looks like below the dam. Gonna be some hard fishing for a week or two. Yeah i know its going to be hard for about 3 weeks for sure. And its like 6 or 7 foot above then it supposed to be. Sent from my LGUS99...

But looking for a other s10 to put a built 350 4 bolt main in. Everyone i found so far has a bent frame or its been rigged so bad that i wont touch it.

Sent from my LGUS992 using Tapatalk

MUP wrote:Yep, was referrin' to the S10. What'cha got now?

2001 honda with the 3.0L vtec

Sent from my LGUS992 using Tapatalk

Well with all the rain every where up on norris is flooded. Well let the pictures tell you what i mean lol. https://uploads.tapatalk-cdn.com/20170428/ba2042bdf0890032d57eb8232dd2189d.jpg https://uploads.tapatalk-cdn.com/20170428/ab500f3d5a94830ad1b607cf4410b9c6.jpg https://uploads.tapatalk-cdn.com/2...

MUP wrote:Good to see you on Charlie! How's the truck running?

Which one lol i sold my s10 with the 350 . didnt have the money to fix it the right way. So i sold to someone else

Sent from my LGUS992 using Tapatalk

Well its good to see you post again.havent been on for a while ol buddy

Sent from my LGUS992 using Tapatalk

Heck yeah as long as you had fun. Im out on norris next to the new 33 bridge havent had any luck so far

Sent from my LGUS992 using Tapatalk

Me either i be dang if ill spend 9 bucks for a cup of that crap

Sent from my LG-D851 using Tapatalk

Found me a other one on gun broker but its in 270 cal thou.

How hard is it to change the barrle to shoot 30-06

Sent from my LG-D851 using Tapatalk

[emoji1] [emoji1] [emoji1] uh oh

Sent from my LG-D851 using Tapatalk